Mini split packages are highly versatile heating and cooling units and are built to be installed in many different scenarios. While the outside condenser is usually mounted the same, the internal unit can be mounted on the ceiling, wall, or near the floor. Units with the inside condenser mounted near the floor are called floor… Read More »
Installing a mini split has many benefits, from better efficiency and lower cost to operate, to DIY installations. Most are familiar with the ductless wall mounted units, but few are aware mini split units also come in a ceiling mounted option. The ceiling mounted option is called cassette type mini split and works just as… Read More »
Heat Pumps are a very efficient way to heat and cool a home; unfortunately, most window air conditioning heat pump units require 220/240 volts to operate. While 220/240-volt electrical lines can always be installed, this can add to the cost of installing a heat pump unit. With most outlets wired for 115-volt, a unit that… Read More »
If you have a mini split that is no longer blowing out cold or hot air, there can be several causes and fixes. Mini split units are usually very reliable and last many years for cooling and heating space. As with anything, there can be issues at times with the problem needs to be narrowed… Read More »
An EL-01 Error on some mini split units indicates a communication problem between the inside and outside units. This includes Pioneer, Carrier, and more units, but be sure to check the error codes for your specific unit. There can be a difference in errors depending on the manufacturer and model, so always verify your mini… Read More »
If you have a DF code on a mini split, it is in Defrost Mode. A DF code is normal and usually temporary. If it does not clear after 15-20 minutes and the outside unit is not frozen there may be an issue. A Mini split unit will go into defrost mode when the outside… Read More »
A draft inducer is a necessary furnace component that helps to vent toxic gases out of a home. Venting toxic gases out of the space being heated is needed to keep the inside air breathable. What is a Furnace Gas Draft Inducer? The combustion chamber in a furnace burns gas and contains harmful carbon dioxide… Read More »
Replacing and installing a Goodman air conditioner system is something that needs to be done once the old unit is worn out. Air conditioner units such as Goodman last many years but eventually will need to be replaced. For Goodman split systems, this includes replacing the outside condenser, evaporator-coil, and sometimes the Line-set. If you… Read More »
There are many mini split systems available from several different manufacturers. Mitsubishi is one such manufacturer that is known for its well-built units and a good warranty. They have many packages that can be installed, including the Hyper Heat model, which is designed for colder temperatures. Mini split heat pump systems work very well cooling… Read More »
Keeping a basement warm and dry can be a challenge at times, depending on how it is built and insulated. There are many ways to heat a basement and maintain a nice comfortable living space. This includes mini-split units, electric heaters, gas, kerosene, and more. With the many options, there is no one-size-fits-all unit. Electric… Read More »