Our Picks for Best Portable Refrigerant Recovery Machine

By | June 27, 2023

Best Portable Refrigerant Recovery Machine
Buying a new recovery machine can be quite an investment that needs to last for many years.

Before leaping in and buying a unit looking through your options and reading reviews is the best buying method to find a good unit.

What fits one scenario might not fit another. If you’re a one-man operation, your requirements can be much different than a large shop with dozens of employees.

What is the Best HVAC Refrigerant Recovery Machine?

The best refrigerant recovery machine will vary from one technician to another and will depend on who you ask.
Top Best Portable Refrigerant Recovery Machine
Since there are many factors to take into account, from cost to recovery times, reading reviews in the forums or on Amazon will help you make a better-informed decision on a unit that will fit your setup.

There are many good units available, with our picks below for the best refrigerant recovery machines.

As always, be sure to read the reviews on Amazon, forums, or elsewhere to be sure a unit is a good fit for you.

*This site contains affiliate paid links for which a commission earned.

Our Picks for Best HVAC Refrigerant Recovery Machines

  1. Robinair RG3
  2. Available Here on Amazon

    The Robinair RG3 is a good unit that I bought and have used for a while now.
    Our Picks Best Portable Refrigerant Recovery Machine 2018
    The unit is oil-less that has a high-pressure safety switch that shuts it down if the pressure goes above 550 PSI, and of course, it will work with any refrigerant R-22, R410a, R-12, R134a and so on.

    Using it on a 3-ton R-22 residential unit will evacuate the system in about 30 minutes. Of course, this will change depending on the temperature and refrigerant type that is in the system.

    Overall a good unit for the money and does not disappoint.
     

  3. Robinair RG6
  4. Available Here on Amazon

    The R6 is the big brother of the R3 with quicker pull-down times. It is also a good unit and worth a look for those running a large shop or many jobs.
     

  5. Appion G5TWIN
  6. Available Here on Amazon

    The Appion G5TWIN is a twin-cylinder unit that is small, lightweight, and fast.
    Best HVAC Refrigerant Recovery Machines 2019 Appion G5 Twin
    I recently helped use one with R-22, R-410A, and NU-22 units; it pumped them all down without any problems.

    The Appion G5 is a solid recovery unit that gets the job done.
     

  7. Inficon G1
  8. Available Here on Amazon

    The Inficon G1 is another good unit that gets the job done.

    It uses a 1-HP dual piston compressor that works nicely.

    Inficon is a good company that has a good warranty on their equipment.

    It also has a purge feature which is good to have when you want to use it with different kinds of refrigerants.
     

  9. Yellow Jacket 95760
  10. Available Here on Amazon

    Yellow Jacket makes many good HVAC tools, including the 95760 recovery unit.
    Best HVAC Refrigerant Recovery Machines 2019 Yellow Jacket
    This model has been available for a while and used by many on the field.

HVAC Refrigerant Recovery Machines Comparison Table

Name VoltageCylinders Type
Robinair RG3115V TwinLightweight Residential
Robinair RG6115V TwinHeavy-duty Residential Commercial
INFICON120V Lightweight Residential
Appion G5TWIN115V TwinHeavy-duty Residential Commercial
Yellow Jacket115V Heavy-duty Residential Commercial

What is a Refrigerant Recovery Machine?

A refrigerant recovery machine removes the refrigerant from an HVAC system without leaking into the environment for disposal or reclaiming.

In the early days of HVAC, repair refrigerant was vented into the atmosphere, which was found to cause problems to the ozone layer.

In the late 1980’s, many nations came together for a summit and signed the Montreal Protocol, which set into law how refrigerants are handled.

One of the requirements is to recover the refrigerant from an HVAC system which is no longer allowed to be vented.

All refrigerants must now be recovered for reclaiming or proper disposal or imposed huge fines.

A recovery machine must be used to recover refrigerants, which pumps out the refrigerant into a storage tank.

Things to Consider When Buying a Refrigerant Recovery Machine

  • Cost
  • Recovery machines are not cheap and are a long-term investment that hopefully will last 10-15 years.

    Units vary in prices from $400-$5,000 depending on name brands and the build.

    Buying a unit online is much cheaper than buying a unit from a local supply house, at least in my case. Large cities may have more competition, driving prices down. Myself living in a smaller town, the local options are limited. For me, prices online were half that of the local HVAC supplier.

    Not everyone will need an expensive recovery machine and can get by with a cheaper model. In comparison, a very busy HVAC shop will need to recover quickly and reliably with technicians moving on the next call.

  • Weight
  • Weight can become a factor when a recovery unit is being hauled around all day. A unit will have to be carried up ladders onto roofs, sometimes over fences, and all matter of obstacles.

    This has become less of an issue in recent years as most units now weigh less than 20 pounds. Years ago, some recovery machines could weigh up to 50 pounds or more.

  • Twin Cylinder vs. Single Cylinder
  • Twin-cylinder units will recover quicker since they are more powerful than a single-cylinder unit. The price matches this, with twin-cylinder units costing more.

  • Oil-less VS Hermetic Compressors
  • This is not much of an issue in 2019 as most recovery machines are now oil-less as compared to hermetic compressors of the past. Oil-less units offer much better recovery rates, direct liquid recovery, elimination of oil maintenance, and the ability to handle multiple refrigerants.

  • Warranties
  • How long the warranty lasts is always a consideration. Name brand companies will no doubt have a reputation to keep and warranty their products for longer. Buying with a credit card can also add warranties which vary from one card to another. Buying from third-party sites such as Amazon also can add another level of protection as all big companies have their own protection plans.

Tips For Using a Recover Machine

  • Don’t use your best manifold gauges when recovering. Having a set of dedicated hoses to make a recovery is ideal. Using a manifold set and hoses that also are used to charge a system can lead to cross-contamination. Plus, when the old refrigerant is recovered, the system might have had a burn-out or any number of contaminants in it. Everyone will have an opinion but ideally, using hoses that are only used for recovering is best.
  • Understand what Push/Pull is and a complete understanding of how it works.
  • Consider making or buying a Sub-cooler that can benefit recovery times in certain cases.
  • Remove Schroeder valves which can restrict the flow of refrigerant.
  • Remember, a recovery cylinder must have 20 percent more capacity than the unit that is being recovered.

Summary
Buying new HVAC equipment such as a portable refrigerant recovery machine is a big purchase that should be thought out.

Every user will have a different need and budget with no one size fits all.

Many units have additional features and better recovery speeds that also may fit a user.

Recovering refrigerants including R-410A, R-407C, R-134a, and even R22 must be done to comply with the EPA 608 requirements.

Portable refrigerant recovery units will recover almost any type of refrigerant on the market and store it in recovery tanks.

Do you have a favorite portable refrigerant recovery machine? Let us know your thoughts below.

Category: Portable Refrigerant Recovery Machine

About Aaron H. Benetti

Aaron H. Benetti an HVAC technician who has worked in the field since 1991. He began his career as an HVAC installer and later began doing troubleshooting and repairs. Around 2010, he began to write books on HVAC topics, mainly tutorials and how-to information. Currently, Aaron works as an HVAC tech and also writes many articles and posts for websites as well as books and videos on HVAC topics.

2 thoughts on “Our Picks for Best Portable Refrigerant Recovery Machine

  1. Chris Bird

    Hi and thanks for this. I am starting a business of recovering refrigerant from abandoned appliances at the dumps in our area and won’t be doing any charging at all. I was looking at the Chinese brands on Amazon in Canada and feel that they would be fine for what I need but I’m trying to find out whether this is true before spending $700-$1000 and then finding out I need to spend $2000. Any thoughts on this?

    Reply
  2. fireship

    I use an Amprobe Promax that is small and light, but those yellow cylinders are heavy when full!

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.