Review: Robinair RG3 Portable Refrigerant Recovery Machine

By | September 17, 2022

Review Robinair RG3 Portable Refrigerant Recovery Machine
Having a refrigerant recovery machine is necessary for an HVAC technician to complete a job that requires recovery.

There are many available with varying price ranges and features.

I found myself looking for a new unit when my old unit finally gave out after many years of use.

My old recovery unit was becoming a hindrance with a leak at the flange located inside the unit.

I repaired it a few times, but the leak would inevitably come back; plus, after ten years of use, it was time to get a new one.

After reading reviews and examining prices, I bought the Robinair RG3 Portable Refrigerant Recovery Machine.

My first impression of it was wow, shiny; after moving on to its functionality, I found it to feel solid and well built.

It is light at only 18 pounds in a nice compact casing.
Robinair RG3 Portable Refrigerant Recovery Machine Review
The RG3 is an oil-less unit that has a high-pressure safety switch that shuts it down if the pressure goes above 550 PSI, and of course, it will work with any refrigerant R-22, R410a, R-12, R134a, and so on.

I used it on a 3-ton R-22 residential unit, and it evacuated the system in about 30 minutes. Of course, this will change depending on the temperature and refrigerant type that is in the system.
Robinair RG3 Portable Refrigerant Recovery Machine overview
The RG3 is the little brother of the Robinair RG6, which is a twin cylinder design and can recover refrigerant quicker.

Summary
The RG3 is a good unit for residential recovery, but if quicker recovery time is your goal, then the RG6 is a better unit to get, although more expensive.

So far, I am impressed with the Robinair RG3; keep in mind this is the first unit I have bought in ten years; hopefully, this one will last as long.

If there is any change with it or I have any problems, I will update this post.

*This post contains affiliate links.
Read More Reviews Here on Amazon
Robinair (RG3 Portable Refrigerant Recovery Machine – 115V, 60Hz, for Both Liquid and Vapor Refrigerant, White


Category: Portable Refrigerant Recovery Machine

About Aaron H. Benetti

Aaron H. Benetti has worked in the HVAC field since 1991. He began his career as an HVAC installer and later began doing troubleshooting and repairs. Around 2010, he began to write books on HVAC topics, mainly tutorials and how-to information. Currently, Aaron writes many articles and posts for websites as well as books and videos on HVAC topics.

3 thoughts on “Review: Robinair RG3 Portable Refrigerant Recovery Machine

  1. vladimir escabia

    thank you for your help, i have a question: how to purge the air that there is inside the hoses before to begin a refrigerant recover?…thak you.

    Reply
  2. peter spry

    i had the robinair RG3 it lasted about one year started blowing fuses and then just sat their run for 3 mins and cool for 20 had to kick it to the curb replace not with robinair this time

    Reply
  3. JOHN D WATSON

    I like the Yellow Jacket products because of parts availability and other information about replacement parts & so on !

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.